When you go to turn on one of your stove’s gas burners, the last thing you expect is that it won’t light.
However, while this type of scenario can be extremely frustrating, it is a fairly common issue.
Most times, fixing a gas burner stove that won’t light is going to be simple. But in certain circumstances, you may need to contact an appliance repair service for help.
Keep reading to learn how to troubleshoot your gas stove’s burners, and what you can do to try and resolve the issue on your own.
Safety Warning: Before you take your stove apart, make sure to turn off all power and gas supply to the appliance. If you don’t proceed with caution, you could end up causing severe injury to yourself and others, or causing damage to the appliance itself.
While frustrating, a gas burner that won’t light up is a common appliance issue.
To try and troubleshoot the issue, you’ll want to check the gas supply, the igniter, the burner element, it’s wiring, and the control module.
A gas stove’s burner requires a steady supply of gas to be able to maintain a flame. If you’ve got a gas burner stove that won’t light, you might have a low or weak gas supply.
So if you suspect you have a problem with the gas supply, you’ll want to contact a professional right away!
The igniter is the part that creates a spark and ignites the gas to create the flame you see coming from your burner. If broken or faulty, the igniter likely won’t produce a spark, and you won’t get a flame.
Before assuming that your igniter is no good, you can try to gently clean it with a soft-bristled brush and a bit of soap and water. Just make sure to thoroughly dry the igniter before testing it, or else it won’t work.
On the brighter side, a faulty igniter is extremely common, and is both inexpensive and easy to replace.
Need help diagnosing why your gas burners aren’t lighting? Don’t hesitate to contact Denver Appliance Repair for prompt appliance repair help in your area!
Although many appliance issues can be diagnosed or repaired on your own, it’s best not to leave problems with a gas stove to chance.
If you can’t get your gas burner stove to light, don’t be afraid to reach out for help. Learn more about appliance repair from a professional repair service, such as Denver Appliance Repair.
When you cook, food particles and grease or oil splashes can often fall onto the burner element.
If not cleaned regularly, over time, this debris can eventually harden and block the flow of gas, which will, in turn, prevent your burners from igniting properly.
Fortunately, the solution to this problem is simple and all you’ll need to do is use a bit of elbow grease to scrub and clean the burner element.
First, make sure the burners are ‘off’. Then, remove the grate, burner caps and the burner base. Take a needle or pin and remove any blockages that may be present in the holes.
Put the parts back into their proper position and then test the burner to see if it will light.
Some fixes for a gas burner stove that won’t light aren’t as simple as a clogged burner element. Damaged or burnt wiring, for example, can sometimes occur when the stove overheats or has been moved.
If your gas stove has loose, damaged, or burnt wiring, it will likely prevent the control module from being able to communicate with the igniters.
When it comes to the inner workings of your stove, it’s crucial to contact someone who has appliance repair experience. Damaged wires require an expert hand to find, diagnose and repair as needed.
A gas stove’s control module tells the appliance what to do and when. For example, when you turn the stove on, the control module will trigger the other components, such as the igniter, to light the burner.
If you have a defective control module, it can impact the functionality of your stove in a number of ways.
The simplest thing to do is to unplug your gas stove from the outlet. Wait a few minutes and then plug the appliance back into the outlet. Sometimes, this will be enough to reset the appliance’s control module and get things working properly again.
However, if the problem is more serious, restarting your stove won’t work. And in this situation, it’s likely in your best interest to contact an appliance repair service.
The control module is a complicated piece of electronic component. Therefore, you should never attempt to remove or fix this part of the appliance on your own. Not only could you end up hurting yourself, but you could end up voiding your appliance’s manufacturer’s warranty or making the issue even worse.