Why a GE Electric Oven Won’t Turn On

We are living in an era of advanced technology. From refrigerators to dishwashers, freezers to ovens, an astonishing array of kitchen appliances has revolutionized our domestic life. Now it is quite difficult to imagine how our ancestors lived without such a useful appliance like an electric oven. When something goes wrong with this appliance, it could be stressful for us. Do not let stress factors impact your life! Repair your GE oven with us! Our qualified technicians have a lot of experience in the appliance repair field and will be delighted to help you.

GE Electric Oven Troubleshooting

If your GE electric oven won’t turn on and you’d like to troubleshoot it by yourself, follow these simple tips:

Test the controls

Check if the controls for the oven temperature are set properly. Consult the instruction manual that came with your oven when needed. If you can’t find your manual, you may be able to download it from the GE website here by entering the oven model number.

Reset the controls

To reset the controls, switch off the circuit breaker that is controlling your GE oven. Wait about a minute, and then use the circuit breaker to restore power. It will help to reset the settings that have been previously used by your appliance.

Test the power supply

Most electric ranges require 240 VAC for smooth operation. If you suspect that the electrical outlet is not providing enough voltage, check the fuse box in your house as the tripped breaker or blown fuse may cause the problem. On the other hand, if there’s power at the electrical outlet, it would indicate a problem with the oven itself.

Examine the bake element

If the heating element has burned out, the oven will not turn on. Turn the oven and circuit breaker off before making a visual inspection to avoid personal injury. Only after that you may check the bake element for cracks or breaks. If the heating element is cracked or broken – it should be replaced.

Possible Problems

If your GE electric oven won’t turn on, here are the most probable causes:

Burnt wire connection

A loose or malfunctioning wire connection could also cause the oven to work inappropriately. The bake or broil power supply wires will commonly burn out near the heating element.

Blown thermal fuse

A thermal fuse will blow if the temperature gets too high, shutting off power to the oven. You can use a multimeter to test the thermal fuse for continuity. If the fuse test negative for continuity, it will need to be replaced.

Defective thermostat

The thermostat or sensor monitors the oven temperature. When a certain temperature is reached, the oven control shuts off the voltage to the part. This cycle continues while you are cooking to maintain the appropriate temperature. If the thermostat or sensor is at fault, the oven may not even turn on. You can use a multimeter to examine the resistance of the sensor at room temperature. The meter should display approximately 1,100 Ohms of resistance. If not, consider replacing the sensor.

Faulty control board

If the sensor shows correct resistance when tested, the oven control board itself could be damaged. While the board cannot be easily examined, you can inspect it for signs of burning or a shorted-out component.